Significance of HRM in the travel and tourism sector

Significance of HRM in the travel and tourism sector The purpose of this report is to evaluate the significance of IHRM for the companies within the travel and tourism sector. The report will address this issue with reference to the case of the British Airways Lpc (BA) one of the largest international airlines. The report will begin by outlining the brief overview of BA, its market and current global position. Besides, the significance of culture change within the company will be identified. Furthermore, the hard and soft models of HRM will be critically analysed in the process. The report also will discuss the staffing issues such as recruitment, selection, and training and development for the planned global expansion. The ways in which these issues may need to change will be illustrated through the strategic evaluation. In addition, all figures will be justified and referenced to the appendix. Moreover, the report will outline the appropriate conclusions and recommendations. Company overview, its markets and current global position British Airways Plc (BA) was created in the 1974s after merger between BEA (British European Airways) and BOAC (British Overseas Corporation) (Air flights, 2010). BA is the United Kingdoms major international airline with two main hubs located in Gatwick and Heathrow airports, and the fifth worlds top airline. BA is a recognized brand within airline industry and the success could attribute to its constant global flight expansion and mergers with other global airlines. The merger between Iberia and BA (International Airlines Group) in 2010 is expected to create the third largest European carrier (see Appendix 1). In addition, the merger with AA (American Airlines) in 2008 will expand the company globally on transatlantic flights. These mergers will make stronger the global position of the new company with strong market capitalisation and will be able to complete with rivals such as Lufthansa and KLM-Air France (See Appendix 2) (Datamonitor, 2009; Euromonitor, 2010). BA is a global leader with a network of 550 destinations internationally via code-sharing relationships serves nearly 95 million passengers a year, using 441 airports in 86 countries and approximately 1,000 planes and a world air share of 2.9% (See Appendix 3) (Brave New Talent, 2008-2010; Wikipedia, 2010). BA operates mostly in the EU and US and employs 40,627 people (Datamonitor, 2009). In addition, BA is a part of Oneworld alliance, which serves some 819 destinations worldwide and enables to compete more successfully around the world with other global alliances (Wikipedia, 2010). Since privatisation in 1987, BA has had a sharp success in income and achieved financial independence, while other European airlines were dependent on state support and their US counterparts resorted to bankruptcy protection (Ledwidge, 2007 and BBC, no date). Despite the BAs HR hard times (appendix) and recent global economic recession in 2008/2009 with the global GDP decline from 5.1% in 2007 to 3.1% in 2008 , BA had a net profit of  £8 billion in 2009/2010 that is an increase of 2.7% over FY2008/2009, which improves its stable geographic increase (Datamonitor, 2010). Besides, BA is the worlds first airline to establish a carbon-offset scheme in 2005 to decrease greenhouse gas emissions and to introduce online boarding passes in 2004 (British Airways, no date and AccessMyLibrary, 2007). Despite BA calls itself as The Worlds Favourite Airline it strives to become the worlds most responsible airline (GreenAir, 2007-2010 and Street, 1994). Cultural change and HRM models Culture is very powerful; it influences people and it is vital for managers to understand the employees: what they believe, its customs and traditions, life style and values, beliefs and morals, to understand how people react, and their expectations in the company after the employment. Legge (2005) identifies culture as a set of shared meanings, or taken-for-granted assumptions. According to Alzira and Easerby-Smith (1993), BA was arrogant before its privatization in 1987. BA believed the customers did not know what they wanted. The managers did not involve the staff in decisions, as they wanted to have distance from staff. The priority was safety of aircrafts and technical skills. Even the competition and profitability were not the main idea. The BA organisational culture was bureaucratic, strict, and formal. Thus, the careers developed slowly. Besides, the cost-leadership strategy is applied that leads BA to cut costs through a hard HRM approach and use staff as any other business resource. The staff is being used as cheaply as possible. In contrast, Ledwin (2007) argues that since 1976 till nowadays it was a big cultural change for BA, where the product-centric approach has started to shape into customer-centric approach and the hard model started to adopt the elements of soft developmental humanism or Harvard model, where the core idea are human assets. The differentation strategy would reach the competitve advantage and try to avoid less prone to disruptions and PR blunders. Moreover, it would present a very effective framework for completely integrating HR with the business strategy (Ledwin, 2007). To improve the organisational performance and to achieve the employee commitment BA promoted the motivational culture change programmes in the 1980s.However, its argued if these programmes were successful or not as according to Hopfl (1992, cited in Legge, 2005), these programmes engaged the mind but left hearts untouched. Despite the HR difficulties during the last five years (See Appendix 4), the company has achieved a respect from its employees in a way that helps the company fence the strike actions. In June 2009, BA told its 42,377 staff to work without pay for a month or take unpaid leave to reduce costs. Almost 6,000 non-cabin crew staff helped during the days of industrial action helped the company to run anoperation (Euromonitor, 2010 and Anglotopia, 2010). Staffing approaches BA can apply one of the three staffing approaches (Dowling et al., 2008): Ethnocentric:- The main idea is to manage staff from the home country (PCNs). The company can apply this approach to all its foreign operations, where the staff holds central jobs, and subsidiaries and headquarters follow the home country resource management practice. Polycentric/Regiocentric:- The idea is to develop HR management practices locally. Geocentric/Global:- The purpose is to manage the employees on a worldwide basis, where the company employs staff from diverse countries. 4.1. Ethnocentric and polycentric approaches BA uses mainly the ethnocentric approach: it controls all its operations from London (the locations of the head office) as it understands local culture, the economy language and avoids relocation costs. Regarding to BA job applications, the key management positions are filled by parent company personnel, where the priorities are given to UK nationals. Besides, it hires host country nationals in foreign countries instead of transferring its domestic staff to work. Depend on the staff role, a polycentric or geocentric approach can be recommended. The polycentric approach would be ideal for BA to employ front line staff and cabin crew. The company should consider the cultural as the core competence and hire more people who speak other languages than English and think differently. Along with the cultural change BA needs to ensure the employees understand their role within the marketing progress and overall marketing orientation within the organization. The best staffing approach to hire key management people and pilots is geocentric approach, where the company strives to reach the global expansion by combining the best from headquarters and the subsidiaries. Also, the nationality is ignored in favor of ability. BA could promote promote diversity, inclusion, and equality of opportunity in employment regardless of sex, marital or civil partnership status, gender reassignment, race, colour, nationality, ethnic or national origins, sexual orientation, disability, religion or belief, political affiliation and age (British Airways, no date). Staffing issues The organisations stage of growth characterises with the integration of business strategy with HRM policies such as training development, appraisal and recruitment and selection. Recruitment is mailny linked to proactive attitude of employees, where training and development has to do with formal or informal education, enabling the staff to know inside out of the organisational mission and its products, thus leading to the quality service. 5.1Recruitment and selection Effectiveness in recruitment and selection is vital as it avoids poor work performance, unacceptable conduct, internal disagreement, low morale and job satisfaction and dysfunctional labour turnover. In addition, luck of management quality and teamwork, and employee motivation and communication can lead to loss of customers, loss of organisation, and loss of life. Recruitment seeks to attract best technical professional talent and then manage rapid internal labour market movements (Legge, 2005:142). BA also tends to attract the most talented people, then assess and appoint a suitable candidate (Appelbaum and Brenda, 2002; Pilbeam and Corbridge, 2006). For example, the pilots employment issues had been based just on flying and technical skills before 1987. Nowadays, BA considers the pilots can work well in a crew situation. Interpersonal skills are appearing as crucial achievement factors for pilot performance and safety. In addition, it cares about quality frontline people as well. G ood (1999, cited by Appelbaum and Brenda, 2002), stresses the point that the single most reliable predictor of overall excellence is the ability to attract and hold on to talented employees. The success is dependent upon the ongoing hard work, attitudes, and dedication of its staff. Thus, to expand globally and to achieve the companys long-term success BA should look not only at education related skills but also at staff attitude within the company, as skills can be trained but attitudes cannot be changed (Milmo, 2010 and Horn and Barkin, 1998). 5.2Appraisal, training, development The globalisation of markets leads to emergence of multinational companies, operating on a worldwide basis. Good training enables the employees to perform their current and future roles effectively as, both organisations and their employees benefit (Beardwell and Claydon, 2006). To achieve a high value added services the staff should be well educated, trained, and committed. To increase competence and go high-class with high quality the company should consider the staff as the most valued resource and do investment in the core workforce. The accent is to include employee loyalty and reliance, internal labour market structures with promotion ladders and skill training. The individualistic approach should be applied to reach the quality and competitive advantage (Legge, 2005). If the quality of service depends on the quality of the employee, the company should look on the society and organisations commitment to developing skills appropriate to a national economic policy and organisational corporate objectives (Legge, 2005). BA committed to customer care programmes and has had many motivational staff programmes for both existing and newly recruited staff since 1987, that at very least heightened employee awareness of quality issues. The programmes such as Putting the Customer First,Putting People First, Customer First teams, Managing People First, A Day in the Life, To be the Best and Winning for Customers . In addition, to promote the values of customer services BA launched the re-educative online-learning programs for cabin crew how to teach in-flight sales system. Besides, BA tried to develop a self-direct learning that motivates and develops its staff not only professionally but personally (Ledwidge, 2007). Conclusion The report began with a brief nature of British Airways, overview of its markets and current global position. It analysed the cultural change within the company and evaluated the HRM models. BA has had a big cultural change since 1987, where the company changed the product-centric approach to a customer-centric approach. The hard model need to adopt elements from the soft developmental humanism model, where the company would realize the importance of integrating HR policies with business objectives involving treating employees as valued assets, as the success depends on securing commitment from people, not controlling them. It should keep adopting the soft model to avoid losses of customers and the bankruptcy and to keep its brand. Over the past decade or so, British Airways has evolved from a loss making, state-owned national carrier into a customer focused, publicly listed and consistently profitable airline. However, cultural change and nowadays change require modification in top management values to make the change successful. To improve the organisational performance and keep the company expand globally BA need to keep these recent changes. Furthermore, the report addresses the issue of staffing approaches such as ethnocentric, polycentric, and geocentric approaches. Despite BA uses the ethnocentric approach, the recommendation are to develop polycentric approach for front line and cabin crew and apply a geocentric approach for pilots and key management staff. The final parts of the report examined the staffing issues such as recruitment and selection, appraisal, training and development. BA should look not only at education related skills but also at staff attitude within the company, as skills can be trained but attitudes cannot be changed. In addition, BA should motivate and develop its staff not only professionally but personally by creating the training centres where staff could learn the sense of humour, ability to work with others and friendliness. Moreover, the new industrial relations backgrounds should be developed as no-strike clauses, acceptance of flexible working, its support for direct employee involvement, staff status and employee development Recommendations According to the mentioned above issues, there is more research should be done regarding to staffing approaches and staffing issues to help expand company globally. The need of change should be analyzed and evaluated deeper. HRM Michigan and Harvard models issues should be more critically discussed. Word count: 2193 word

Essay on The Picture of Dorian Gray as a Moral Book -- Picture Dorian

The Picture of Dorian Gray as a Moral Book The Picture of Dorian Gray was a remarkably well-written book due to the reaction of its themes by society. In the preface of the novel, Wilde introduces the opinion that "...there is no moral or immoral book. Books are well written or badly written. That is all." Numerous views can be taken upon this fastidious comment. Many would agree that Wilde is justifiably correct because the preface was written with the intention that his readers understand the deeper meaning of the themes than worrying about whether it is considered morally acceptable; or perhaps, the view that it could be considered moral or immoral by the impact it has on the readers' lives. Even though there are several positions held on what The Picture of Dorian Gray's most important meaning is about, the most prominent is the novel as a moral book. Lord Henry Wotton immediately begins to corrupt Dorian's mind after they first meet by forcing his immoral thoughts of "yielding to temptation" which allows Lord Henr y to hold his attention. After listening for quite a while to Lord Henry's views, Dorian begins to change his own to match them, and therefore begins to live a life of immorality. The yellow book is a device that Lord Henry uses to further corrupt and drive Dorian deeper into the pits of sin. Through Lord Henry's influence, the changes in Dorian Gray, and the impact of the yellow book, Oscar Wilde efficiently reveals The Picture of Dorian Gray as a moral book. Lord Wotton sees Dorian as "wonderfully handsome...all of youth's passionate purity," and cannot resist the t... ...self from the influence of this book. Or perhaps...that he never sought to free himself from it." Dorian procures nine copies from Paris to have them bound in different colors to fit his mood, which implies that he was in all probability never without it. From the yellow book the moral learned is "all access as well as all renunciation" leads to punishment. In conclusion, it has been reiterated that Lord Henry's influence, the changes in Dorian, and the immorality of the yellow book further enforced The Picture of Dorian Gray as a moral book. Oscar Wilde allows for those who could understand the real meaning of the novel by comprehending the importance of these three things to discern that he fully intended on writing this novel as a moral book.

Nationalism And Sectionalism Essay

The Era of Good Feeling: The Effects and Consequences of Nationalism and Sectionalism In 1815, shortly before the start of James Monroe’s presidency and after the War of 1812, a historical period known as the â€Å"Era of Good Feeling† commenced in America. However, though the name of this age alone insinuated a time of unity and prosperity within the nation, sectionalism became an unequivocal dilemma that seeped through the government’s attempts in promoting nationalism, and ultimately divided the country. The Era of Good Feeling was a time where only one political party reigned, sense of unity prevailed, and national pride was evident within the citizens. This post ­war nationalism fueled the country to work towards a common goal, and even encouraged creation of traditions that would be passed down generations. The McCulloch v. Maryland case in 1819 exhibits government’s attempt in putting up a unified front to further promote nationalism. In this case, the Congress’ power is questioned when the ruling prevented states from outlawing or taxing the national bank, as Maryland tried to do. The document states, â€Å"The power of the general government, it has been said, are delegated by the states, who alone are truly sovereign† (Document 4). However, the outcome of the case only came to show that the federal government had more power compared to the state government, and thus portrayed a stronger, unified system. In Document 3, people are portrayed to be celebrating Independence Day on the fourth of July within the same year of the case. This depicts the effect that national pride had, bringing together multiple races, genders, social classes, and age groups to celebrate the country’s independence. Furthermore, this era also brought forth a fundamental period in Am erica known as the Industrial Revolution. This introduced market economy to the population and transitioned America to manufacturing processes that brought economic benefits to the north. Market economy not only changed the way people worked, but also the way they lived, as it divided labor, based work in factories, and opened new markets like the American Fur Company. Due to the prior Embargo Act, merchants also invested in national local manufacturing, and thus allowed for the rapid development of urban districts and increase in population. It brought wealth to the North’s market ­based economy but contradicted with the South’s focus on an agricultural economy that depended on slaves. One of the most significant developments within the country was introduced shortly after the War of 1812, by politician Henry Clay, as the American System. The plan promoted a system in which the South was seen to be the producer of raw goods, North for the manufacturing, while the West as the breadbasket of the country. It consisted of three parts: the development of canals, road systems and railroads, creation of a protective tariff, and the reinstating of the Bank of U.S.. The North prospered from the creation of the tariff as it helped develop the manufacturing economy. The West, on the other hand, benefitted from the creation of road and canal system, a plan supported by John C. Calhoun, in order to prevent disunion within the rapidly growing country, (Document 2). These developments in transportation allowed for easier distribution of goods, thus benefitting them as well. However, the protective tariff prevented the South’s economy from growing, thus leading to an evident economic gap between the North and the South, as the former’s economy started to boom due to the increase in manufacturing.

How Milling Is Metal Removal Process - 1249 Words

2.1 Introduction Milling is metal removal process distinguished from drilling and other machining operation. It is used in most high productive manufacturing industries, where quality is essential for parts. In milling operation, Metal removal takes place due to the cutting action of a revolving milling cutter, when work piece is fed on it. But for producing quality side surface of parts, end milling operation carried out. Drill bit can cut in axial order only, while a milling bit can generally cut in all directions, although some cannot cut axially. End mills are used in milling applications such as plunging, side milling and profile milling. 2.2 Optimization The main purpose of most engineering design procedure is to improve productivity with reduction in cost. The algorithm of an optimization is a one type of procedure which executed optimum solution by comparing various solutions till the satisfaction level. In conventional method, solutions were accepted by comparing few designated answers in many industrial process design activity. This is very simple approach and no guarantee for an optimum solution. To get the proper values of optimization, user must have to apply one or more design solutions to check relative search space between algorithm techniques. The role of controllable cutting parameters (Speed, feed, depth of cut, width of cut etc.) for economical machining process, optimization have been recognized. F. W. Taylor (1907) showed that an optimumShow MoreRelatedEngineering Design And Manufacture By Looking At Traditional Manufacturing Processes And Non Contact Processes1558 Words   |  7 Pages1.0 – Summary In this assignment I have demonstrated an understanding of engineering design and manufacture by looking at traditional manufacturing processes and non-contact processes. I have selected the right process/process and its suitable materials, economics, quality issues, dimensional accuracy and they’re advantages/disadvantages. I have given a thorough conclusion on what method I believe is the best depending on the quantity of lathe carrier body’s being made and also value for money. TableRead MoreNon-Traditional Machining5005 Words   |  21 PagesManufacturing, 3/e (published by Wiley)  © MPGroover 2007 26 NONTRADITIONAL MACHINING AND THERMAL CUTTING PROCESSES Review Questions 26.1 Why are the nontraditional material removal processes important? Answer. Reasons for importance of are nontraditional material removal processes (1) the need to shape new metal alloys and non-metals that are difficult to machine by conventional processes; (2) the requirement of unusual and complex workpart geometries; and (3) the need to avoid surface damage which isRead MoreHow Milling Is A Vital Process For Minimizing The Machined Damage2140 Words   |  9 PagesMilling is a vital process used in the industry to make and assembling the components. The extensive and expensive experimental work is necessary to determine the optimal of machining process parameters for obtaining the desired machined quality. In this regard, the present work is focused on the relationship between the input process parameters and machined surface integrity for minimizing the machined damage. Moreover, the paper presents the comparative analysis and performance of two differentRead MoreEvaluating Th e Cutting Process Parameters For Achieving The Preferred Machined Quality2077 Words   |  9 PagesMilling is a constructive machining process used in the production industry to make and assembling the components. The extensive and expensive experimental work is necessary to evaluate the cutting process parameters for achieving the preferred machined quality. In this regard, the present work is focused on minimizing the machined damage. Moreover, the paper presents the comparative analysis and performance of two different mill tools such as a specially designed carbide tipped tool and a solidRead MoreThe Analysis And Performance Of Two Different Mill Tools2104 Words   |  9 PagesAbstract Milling is a vital process used in the industry to make and assembling the components. The extensive and expensive experimental work is necessary to determine the optimal of machining process parameters for obtaining the desired machined quality. In this regard, the present work is focused on the relationship between the input process parameters and machined surface integrity for minimizing the machined damage. Moreover, the paper presents the comparative analysis and performance of twoRead MoreValue Stream Mapping1827 Words   |  8 PagesSTREAM MAPPING Value stream mapping is a Lean process-mapping method for understanding the sequence of activities used to produce a product. During the Green Suppliers Network technical review, you will use value stream mapping to identify sources of non-value added time or materials; identify opportunities to increase efficiency; and develop a plan for implementing improvements. Value stream maps serve as a critical tool during the review process and can reveal substantial opportunities to reduceRead MoreMetal and Non-Metal1853 Words   |  8 PagesWHAT IS METAL? A metal is a chemical element that is a good conductor of both electricity and heat. Metals  are malleable and ductile and have lustrous appearance. They have moderate to high physical constants and high tensile strength. Metals are further divided into two main groups - ferrous and non ferrous metals. TYPES OF METAL †¢ FERROUS METAL These are metals which contain iron. They may have small amounts of other metals or other elements added, to give the required propertiesRead MoreThe Application Of Digital Technology2026 Words   |  9 Pagesknowledge in working in a complete virtual environment if that they are to benefit from these new procedures. This essay aims to give an overview of computer designed prosthesis coupled with additive manufacturing and laser sintered manufacturing and how they each specifically relate to the appliance that dental technologist create. It will also outline the advantages and disadvantages of using such technologies in dental practice. The term ‘CAD/CAM’ stands for Computer-Aided Design/Computer-AidedRead MoreEnvironmental Issues Of Global Reuse And Recycling Of Personal Electronic Devices1708 Words   |  7 Pagesreduction and diversion, and recycling. The belief of this organization is that society must begin eliminating waste because of its huge impact on the environment. The mission of RCO is to inform and educate society about the impact of waste, how to avoid waste and how it can still be efficient for other sources. This organization is working with the government of Ontario and Bill 151. On November 26th 2015 the government created this new waste reduction and resource recovery legislation act. ComputerRead MoreThe Use of CAD/CAM in Dentistry Essay2644 Words   |  11 Pagesis an abbreviation for computer aided design and computer aided manufacturing and involves the use of computer systems to assist in the creation, modification, analysis or optimism of a design. Its primary purpose is to create a faster production process as well as improve the quality of design. CAD/CAM is currently employed in many fields such as shipbuilding, aerospace, architecture, automotive and prosthetics (including maxillofacial prosthetics and dentistry). The concept of CAD/CAM in the field